SAVE 38%
GLOSS CANDY RED FADE/BLACK/HYPER

2017 S-Works Demo 8

Was: £7250.00
Now: £4499.00

GLOSS CANDY RED FADE/BLACK/HYPER

Sizes:
SHORT
MEDIUM
LONG
EXTRA LONG


Part No. 99917-0003
HOME > BIKES > MOUNTAIN > 2017 S-WORKS DEMO 8

How would you describe downhill racing - Relentless, fast, aggressive, FUN If you want a ride that'll upkeep these expectations, check out our S-Works Demo 8. By choosing the right bike for the job, you're gaining control in an -almost- uncontrollable situation. Additionally, with the S-Works Demo 8, you're maintaining confident handling and harnessing gravity's pull - ultimately, it doesn't get better than this.

Starting with the frame, we've used full FACT 11m carbon fibre construction for absolute low weight and heightened levels of strength and stiffness, this is pushed by an asymmetrical design for plenty of access. Additionally, we've paired this with our S3 Geometry that increases control and responsiveness, while the 200mm of travel at the rear makes the S-Works Demo 8 capable of taking on the biggest hits: effortlessly.

Featuring the RockShox BoXXer Team 650B fork that is something of legends, with 200mm of travel, a Charger Damper for maximum efficiency, and Power Bulge reinforced lower legs that allow oversized bushings for incredible stiffness. It's fair to say, with features like this it's not surprising this fork is a fan favourite and that's why the S-Works Demo 8 has equipped this component.

As for the brakes, we've used SRAM Guide RS brakes with Code callipers that provide powerful, exact and customisable braking. They've been based upon a four-piston calliper design that puts out smooth, reliable braking strength. Meanwhile, the Reach Adjust feature allows you to customize the position for easy, one-finger pulls and SRAM's SwingLink technology the cam system minimizes deadband without sacrificing modulation.

If you need the absolute best in downhill racing, you've found it in our S-Works Demo 8. Now go out and shred the terrain with confidence!

  • The frame features a full FACT 11m carbon fiber construction for low weight and heightened levels of strength and stiffness, which is amplified by its asymmetrical frame design that still leaves plenty of access. This has also been paired with our proven S3 Geometry that increases maneuverability and responsiveness, while the 200mm of travel at the rear makes the bike capable of taking on the biggest of hits in stride.
  • RockShox BoXXer Team 650b fork is nothing short of legendary. With 200mm of travel, a Charger Damper for maximum efficiency, and Power Buldge reinforced lower legs that allow oversized bushings for incredible stiffness, it's easy to see why it's such a fan favorite for gravity fiends.
  • Custom SRAM Guide RS brakes w/ Code calipers provide powerful, precise, and highly adjustable braking. Their based on a four-piston caliper design that puts out smooth, dependable stopping power, while the Reach Adjust feature allows you to customize the position for easy, one-finger lever pulls. And with SRAM's SwingLink technology, the cam system minimizes deadband without sacrificing modulation.


FRAMEFACT 11m, S3 Geometry, carbon front triangle, full carbon link and rear end, FACT IS construction, BB30, full internal cable routing, 135mm dropouts, lipped and sealed cartridge bearing pivots, replaceable derailleur hanger, 200mm of travel
FORKRockShox BoXXer Team 650b, coil spring, S: Extra soft spring, M: Soft spring, L: Medium spring, XL: Firm spring, 200mm of travel, charger damper, compression adjust, rebound adjust, alloy steerer, 48mm offset, Maxle Lite DH
REAR SHOCKCustom Öhlins TTX, Twin-Tube desgin, high and low-speed compression adjust, rebound adjust, 9.5x3"
FRONT HUBSpecialized disc, alloy flange & disc mount, sealed cartridge bearings, 20mm thru-axle, 32h
REAR HUBCustom DT Swiss 350, 135mm spacing, SRAM XD driver, 54T ratchet, 12mm thru-axle, 32h
SPOKESDT Swiss Competition, stainless, black 1.8/2.0"
RIMSRoval 650b, alloy, 24mm inner width, 32h
INNER TUBESStandard, Presta valve
FRONT TYREButcher, DH casing, 650bx2.5", 60TPI, wire bead
REAR TYRESlaughter, DH casing, 650bx2.3", 60TPI, wire bead
CRANKSETSRAM X0 DH, BB30, carbon arms, triple base w/Gamut bashguard 165mm
CHAINRINGSSRAM 34T
BOTTOM BRACKETSRAM BB30, 83mm
SHIFT LEVERSXO DH, 7-speed, trigger
REAR DERAILLEURSRAM X01 DH, short cage, 7-speed
CASSETTESRAM X01 DH, 7-speed, 10-24t
CHAINSRAM PC-1130, 11-speed w/PowerLink
FRONT BRAKECustom SRAM Guide, Guide lever with Code 4-piston caliper, hydraulic disc, metallic pads, 200mm rotor
REAR BRAKECustom SRAM Guide, Guide lever with Code 4-piston caliper, hydraulic disc, metallic pads, 180mm rotor
HANDLEBARSSpecialized DH, FACT carbon, 6-degree upsweep, 8-degree backsweep, 27mm rise, 780mm, 31.8mm
GRIPSSpecialized Sip Grip, half-waffle, S/M: regular thickness, L/XL: XL thickness
STEMSpecialized P.Series MTB, forged alloy, 4-bolt, 45mm
SADDLEPhenom Expert, Adaptive Edge design, hollow titanium rails, 143mm
SEATPOSTThomson, alloy, straight, 12-degree clamp
SEAT BINDERAlloy, 36.9mm
PEDALSSpecialized Boomslang, 6061 alloy, sealed cartridge bearings

As with any product, specification is subject to change without prior notification. You are advised to confirm current specification before buying.


Size S M L XL
B-B Drop 12mm 12mm 12mm 12mm
B-B Height 342mm 342mm 342mm 342mm
Bike Stand-Over Height 698mm 698mm 698mm 698mm
Chain-Stay Length 430mm 430mm 430mm 430mm
Fork Length (full) 590mm 590mm 590mm 590mm
Fork Rake/Offset 52mm 52mm 52mm 52mm
Front-Center 754mm 779mm 799mm 819mm
Head-Tube Angle 63.5° 63.5° 63.5° 63.5°
Head-Tube Length 105mm 105mm 105mm 105mm
Reach 395mm 420mm 440mm 460mm
Seat-Tube Angle 74° 74° 74° 74°
Seat-Tube Length 367mm 367mm 367mm 367mm
Stack 614mm 614mm 614mm 614mm
Top-Tube Length (horizontal) 571mm 596mm 616mm 636mm
Trail 118mm 118mm 118mm 118mm
Wheelbase 1183mm 1208mm 1228mm 1248mm

Leave a review




YOUR BASKET

    There are no items in your shopping basket!
View Basket Go to Checkout