S-Works Stumpjumper EVO
The S-Works Stumpjumper EVO is much more than just a trail bike, it’s a shred-sled built to full-send down the gnarliest trails. Featuring an all-new design, with an adjustable head tube angle, 150mm of performance tuned travel, and the adaptability of S-Sizing, this thing is an absolute ripper. The S-Works Stumpjumper EVO—get rowdy. In true S-Works fashion, the S-Works Stumpjumper EVO is built to the hilt. A Fox Factory fork and rear shock handle suspension duties, while SRAM Code RSC four-piston brakes scrub speed, and a full SRAM AXS wireless groupset completes this lust-worthy build.
The S-Works Stumpjumper EVO is much more than just a trail bike, it’s a shred-sled built to full-send down the gnarliest trails. Featuring an all-new design, with an adjustable head tube angle, 150mm of performance tuned travel, and the adaptability of S-Sizing, this thing is an absolute ripper. The S-Works Stumpjumper EVO—get rowdy.
In true S-Works fashion, the S-Works Stumpjumper EVO is built to the hilt. A Fox Factory fork and rear shock handle suspension duties, while SRAM Code RSC four-piston brakes scrub speed, and a full SRAM AXS wireless groupset completes this lust-worthy build.
- 150MM OF TRAIL-TAMING TRAVEL All the travel in the world is useless without the proper kinematics, which is why we kept it at the forefront of the new Stumpjumper EVO design. With the learnings from the suspension design on the Enduro, and over 1,000 hours of field and suspension lab development, we’ve not only improved the pedaling performance of the Stumpjumper, but we’ve made it more capable, agile, and lively. We increased anti-squat, so the suspension better-resists pedal bob and then, we further-improved bump performance on square-edge hits. Bottom line? This thing shreds trails not legs.
- ADJUSTABLE GEOMETRY The S-Sizing geometry of the new Stumpjumper EVO is our most progressive yet. Long, low, slack, a short offset fork, a steeper seat tube angle—they’re all the talk of the town because they make your ride better. But the perfect geometry is different for different riders, which is why the geo on the new Stumpjumper EVO is fully adjustable with six different settings. Not only are you able to adjust the BB height by 10mm, but you can adjust your head tube by two-degrees. Finally, if you want to go full-party mullet-mode, the EVO lets you run a 27.5-inch rear wheel mated with a 29-inch front.
- RIDER-FIRST ENGINEERED™ Rider-First Engineered™ frames use a size-specific approach to ride characteristics that ensures every frame performs flawlessly. So, whether you’re a Grom riding an S1, or in need of the lengthy S6, you’ll experience the same ride characteristics—on-rail cornering and balanced front and rear stiffness, all at the lightest-possible weight.
- SWAT™ When we introduced the SWAT™ door on the Stumpjumper in 2016, we increased pocket space, and added room for those “oh s**t” pumps and flat accessories. With the new Stumpjumper, we’ve kept those same design hallmarks, but have increased the volume and added a SWAT™ Bladder, that gives you an extra 22oz of water hidden in your downtube. Yes, it’s the same size as a small bottle.
Please note that this bike does not come with pedals.
|Frame||FACT 11m carbon chassis and rear-end, carbon shock extension, asymmetrical design, 29 Trail Geometry, SWAT™ Door integration, head tube angle adjustment, horst pivot BB adjustment, threaded BB, fully enclosed internal cable routing, 12x148mm dropouts, sealed cartridge bearing pivots, replaceable derailleur hanger, 150mm of travel|
|SWAT||Increased-volume SWAT™ Door integration with 22oz SWAT™ Bladder|
|Rear Shock||FOX FLOAT DPX2 Factory, Rx Trail Tune, EVOL Air sleeve, Kashima coat, 3-position adjustment w/ Open Mode adjustment, S1:210x50mm, S2-S6:210x55mm|
|Fork||FOX FLOAT 36 Factory, GRIP2 damper, Kashima Coating, 15x110mm, 44mm offset, S1: 150mm of travel, S2-S6: 160mm of travel|
|Stem||Deity Copperhead, 35.0mm|
|Handlebars||Roval Traverse SL Carbon, riser bar, 6-degree upsweep, 8-degree backsweep, 30mm rise, 800mm, 35.0mm|
|Grips||Deity, Knuckleduster, Black|
|Rear Brake||SRAM Code RSC, 4-piston caliper, hydraulic disc, 200mm|
|Front Brake||SRAM Code RSC, 4-piston caliper, hydraulic disc, 200mm|
|Shift Levers||SRAM XX1 Eagle AXS|
|Cassette||SRAM XG-1299 Eagle, 10-52t|
|Rear Derailleur||SRAM XX1 Eagle AXS|
|Chain||SRAM XX1, 12 speed|
|Crankset||SRAM X01 Eagle, DUB, S1:165mm, S2-S5: 170mm, S6: 175mm|
|Bottom Bracket||SRAM DUB, BSA 73mm, threaded|
|Rims||Roval Traverse SL 29, hookless carbon, 30mm inner width, 2Bliss Ready, hand-built, 28h|
|Front Hub||Roval Traverse SL, sealed cartridge bearings, 15mm thru-axle, 110mm spacing|
|Rear Hub||Roval Traverse SL, DT Swiss Star Ratchet, 54t engagement, SRAM XD driver body, 12mm thru-axle, 148mm spacing|
|Front Tire||Butcher, GRID TRAIL casing, GRIPTON® compound, 29x2.3"|
|Spokes||DT Competition Race|
|Rear Tire||Eliminator, GRID TRAIL casing, GRIPTON® compound, 29x2.3"|
|Saddle||Bridge, 155/143mm, Hollow Ti-rails|
|Inner Tubes||Standard, Presta valve|
|SeatPost||RockShox Reverb AXS, 30.9, 1X remote, (S1:100mm, S2: 125mm, S3: 150mm, S4-S6: 170mm)|
|Seat Binder||Alloy, 38.6|
As with any product, specification is subject to change without prior notification. You are advised to confirm current specification before buying.
Please note that this bike does not come with pedals.
|Bike Standover Height||733||764||763||762||767||770|
|Fork Length (full)||561||571||571||571||571||571|
|Max Seatpost Insertion||180||180||200||220||240||260|
|Min Seatpost Insertion||80||80||80||80||80||80|
|Seat Tube Angle||78||77.6||77.2||76.9||77||77|
|Seat Tube Length||385||385||405||425||445||465|
|Top-tube Length (horizontal)||538||564||590||623||647||679|