2018 S-WORKS VENGE VIAS DISC DI2
Was: £9000.00
Now: £7200.00
Sorry, this is now sold out.
The newer S-Works Venge Disc – SRAM eTAP can be found here.
If you were looking for the best in performance gear and innovation, you'd look at what the pros are riding, right Rigorously tested, World Tour-proven, fast, future-proof and aesthetically-pleasing are all terms you might use to describe the S-Works Venge ViAS Disc Di2. The S-Works Venge ViAS Disc was subject to extensive testing in our Win Tunnel during which every tube and trailing edge was optimised for speed. To ensure every rider gets the full benefit out of the aerodynamic characteristics, the frame is Rider-First Engineered so that its properties are consistent no matter the frame size. This new Venge ViAS is so stiff at the front-end that it exceeds the Tarmac by a staggering 30%. Staying at the front-end, the area which leads the way through the wind, we swapped the traditional stem and bar combo for our aero ViAS setup. The old style cockpit just causes too much drag whereas the ViAS interface with its negative 17-degree stem and Aerofly bars maintains the optimum riding position and achieves a greatly reduced drag effect. It also means that the bike has barely any visible cables, so it looks the business. Everyone knows that power meters are the ultimate training and racing aid, and with that in mind, we've equipped the S-Works Venge ViAS Disc with our light, stiff carbon fibre S-Works cranks complete with dual-sided power measurement. With independent strain gauges on each crank, you get both total power and power-per-leg readings. You'll also get unidirectional power measurement and on-board temperature compensation so that your readings are accurate to within 1%. The Venge frame was born from a desire to marry the undeniable stopping power of disc brakes with un-compromised aerodynamic design. Naturally, it's to be expected then that the hydraulic braking system is seamlessly integrated into the build, complemented by a whole host of top-of-the-line performance components. The frame is equipped with a Shimano Dura-Ace Di2 groupset and our fast-rolling carbon Roval CLX 64 wheelset for the best of reliability and power.
- The Rider-First Engineered™, FACT 11r frame design has made the Venge the stiffest, most aerodynamic bike that we’ve ever created. Every tube shape, trailing edge, and design cue was influenced by hours of testing in our Win Tunnel, computational fluid dynamics, 3D printed prototypes, and real-world rider feedback. And ultimately, this resulted in the fastest bike we’ve ever made.
- Designed in our Win Tunnel, the fork features a top-end S-Works FACT 11r carbon construction that helps to cut through air like a hot knife through butter.
- A 52/36T S-Works carbon fiber crankset delivers the ultimate in power transfer, with a chainring grouping that's equally suited to big alpine climbs as it is to throwing down the gauntlet on the flats.
| FRAME | S-Works FACT 11r carbon, Rider-First Engineeredâ„¢, Win Tunnel Engineered, internal cable routing, 12x142mm thru-axle, carbon OSBB, flat disc mount |
| FORK | S-Works FACT 11r carbon, full monocoque |
| FRONT WHEEL | Roval CLX 64 Disc rim, Roval AFD1, Centerlock, CeramicSpeed bearings, 21h |
| REAR WHEEL | Roval CLX 64 Disc rim, Roval AFD2, Centerlock, CeramicSpeed bearings, DT Swiss 240 internals, 11-speed, 12x142mm thru-axle, 24h |
| INNER TUBES | 700x18/25mm, 80mm Presta valve |
| FRONT TYRE | Turbo Cotton, 700x26mm, 320 TPI |
| REAR TYRE | Turbo Cotton, 700x26mm, 320 TPI |
| CRANKSET | S-Works carbon fiber |
| CHAINRINGS | 52/36T |
| BOTTOM BRACKET | OSBB, CeramicSpeed bearings |
| SHIFT LEVERS | Shimano Dura-Ace Di2 Disc 9170 |
| FRONT DERAILLEUR | Shimano Dura-Ace Di2 9150, braze-on |
| REAR DERAILLEUR | Shimano Dura-Ace Di2 9150, 11-speed |
| CASSETTE | Shimano Dura-Ace 9100, 11-speed, 11-30t |
| CHAIN | Shimano Dura-Ace,11-speed |
| FRONT BRAKE | Shimano Dura-Ace 9170 hydraulic disc |
| REAR BRAKE | Shimano Dura-Ace 9170 hydraulic disc |
| HANDLEBARS | S-Works Aerofly ViAS, 25mm |
| TAPE | S-Wrap w/ Sticky gel |
| STEM | Venge ViAS aero |
| SADDLE | S-Works Power, 143mm, carbon rails, carbon base, synthetic leather |
| SEATPOST | Specialized Venge Aero seatpost, FACT carbon |
| SEAT BINDER | Specialized Venge assembly |
| PEDALS | Nylon, 105x78x28mm, loose balls w/ reflectors |
As with any product, specification is subject to change without prior notification. You are advised to confirm current specification before buying.
| Size | 49.0 | 52.0 | 54.0 | 56.0 | 58.0 | 61.0 |
|---|---|---|---|---|---|---|
| BB Drop | 71.5mm | 71.5mm | 69mm | 69mm | 68mm | 67.5mm |
| BB Height | 270mm | 270mm | 272.5mm | 272.5mm | 274mm | 274mm |
| Bike Standover Height | 730mm | 755mm | 775mm | 795mm | 826mm | 850mm |
| Chainstay Length | 410mm | 410mm | 410mm | 410mm | 410mm | 410mm |
| Fork Length, Full | 358mm | 358mm | 358mm | 358mm | 358mm | 358mm |
| Fork Rake/Offset | 44mm | 44mm | 44mm | 44mm | 44mm | 44mm |
| Front Center | 575mm | 575mm | 581mm | 592mm | 606mm | 613mm |
| Head Tube Angle | 72.25° | 73° | 73° | 73.5° | 73.5° | 74° |
| Head Tube Length | 110mm | 130mm | 150mm | 170mm | 200mm | 220mm |
| Reach | 386mm | 385mm | 386mm | 395mm | 401mm | 408mm |
| Seat Tube Angle | 75.5° | 74° | 73.5° | 73.25° | 73° | 72.5° |
| Seat Tube Length | 441mm | 461mm | 481mm | 501mm | 524mm | 554mm |
| Stack | 505mm | 526mm | 543mm | 564mm | 591mm | 612mm |
| Top Tube Length, Horizontal | 518mm | 536mm | 547mm | 565mm | 581mm | 600mm |
| Trail | 63mm | 58mm | 58mm | 55mm | 55mm | 52mm |
| Wheelbase | 974mm | 974mm | 981mm | 992mm | 1006mm | 1014mm |
Related Products
Leave a review