S-Works Stumpjumper EVO

£6,500.00  £10,000.00
10 days free insurance available
We're sorry, this item is currently out of stock. Please register below to be reminded when this comes back in stock.
Check store availability

The Specialized S-Works Stumpjumper EVO is a top-of-the-line mountain bike, designed for shredding trails with its adjustable features and high-performance build. Featuring Fox Factory suspension, SRAM Code RSC brakes, and a full SRAM AXS groupset, this bike is ready for any adventure. The innovative design, including S-Sizing geometry and Rider-First Engineered™ frames, ensures unmatched handling and performance for riders of all sizes. Plus, with additional storage space in the SWAT™ door, this bike is perfect for all-day excursions. Find your perfect ride with the Specialized S-Works Stumpjumper EVO.

Part Number:

96322-0001

GTIN/UPC:

888818752560

The S-Works Stumpjumper EVO is much more than just a trail bike; it’s a shred-sled built to full-send down the gnarliest trails. Featuring an all-new design, with an adjustable head tube angle, 150mm of performance tuned travel, and the adaptability of S-Sizing, this thing is an absolute ripper. The S-Works Stumpjumper EVO—get rowdy.

In true S-Works fashion, the S-Works Stumpjumper EVO is built to the hilt. A Fox Factory fork and rear shock handle suspension duties, while SRAM Code RSC four-piston brakes scrub speed, and a full SRAM AXS wireless groupset completes this lust-worthy build.

  • All the travel in the world is useless without the proper shock tuning and kinematics. For the new Stumpjumper EVO design, we prioritized kinematic performance. Applying lessons learned while developing the Enduro, then following that with more than 1,000 hours of field and suspension lab development, we’ve not only improved the pedaling performance of the Stumpjumper, but we’ve made it more capable, agile, and lively. We increased anti-squat, so the suspension better resists pedal bob, and we further improved bump performance on square-edge hits. Bottom line? This thing shreds trails, not legs.
  • The S-Sizing geometry of the new Stumpjumper EVO is our most progressive yet. Long, low, slack, short offset fork, steeper seat tube angle – these are requirements for modern progressive riding. But not everyone jibs the same way, which is why the geo on the new Stumpjumper EVO is fully adjustable with six different settings. You can adjust the BB height by 10mm, you can adjust your head angle by two-degrees, and you can make these adjustments independently of each other. Finally, if you want to go full-party mullet-mode, the EVO lets you run a 27.5-inch rear wheel mated with a 29-inch front.
  • Rider-First Engineered™ frames use a size-specific approach to ride characteristics that ensures benchmark handling and flawless performance, regardless of frame or rider size. Whether you’re a jump-happy grom riding an S1, or a DH-fiend giant in need of the lengthy S6, you’ll experience the same ride traits – rail-sharp cornering and balanced front and rear stiffness – at the lightest-possible weight.
  • We introduced the SWAT™ door on the Stumpjumper in 2016, adding room IN your frame for those “oh sh**t” necessities like pumps and spare tubes, and immediately rendering jersey pockets redundant. With the new Stumpjumper, we have increased the volume and added a SWAT™ Bladder, giving you an extra 22oz of water storage – the same size as a small water bottle – hidden in your downtube.

FrameFACT 11m carbon chassis and rear-end, asymmetrical design, 29 Trail Geometry, SWAT™ Door integration, head tube angle adjustment, horst pivot BB adjustment, threaded BB, fully enclosed internal cable routing, 12x148mm dropouts, sealed cartridge bearing pivots, replaceable derailleur hanger, 150mm of travel
SWATIncreased-volume SWAT™ Door integration with 22oz SWAT™ Bladder
Rear ShockFOX FLOAT X Factory, Rx Trail Tune, EVOL Air sleeve, 2-position lever w/ LSC adjustment, S1:210x50mm, S2-S6:210x55mm
ForkFOX FLOAT 36 Factory, GRIP2 damper, 15x110mm, 44mm offset, S1: 150mm of travel, S2-S6: 160mm of travel
StemDeity, 35.0mm
HandlebarsRoval Traverse SL Carbon, riser bar, 6-degree upsweep, 8-degree backsweep, 30mm rise, 800mm, 35.0mm
GripsDeity, Knuckleduster, Black
Front BrakeSRAM Code RSC, 4-piston caliper, hydraulic disc, 200mm
Rear BrakeSRAM Code RSC, 4-piston caliper, hydraulic disc, 200mm
Rear DerailleurSRAM XX1 Eagle AXS
Shift LeversSRAM Eagle AXS Rocker Paddle
CassetteSram XG-1299, 12-Speed, 10-52t
ChainSRAM XX1 Eagle
CranksetSRAM X01 Eagle, DUB, S1:165mm, S2-S5: 170mm, S6: 175mm
ChainringsAlloy, 30T
Bottom BracketSRAM DUB, BSA 73mm, threaded
RimsRoval Traverse SL 29, hookless carbon, 30mm inner width, 2Bliss Ready, hand-built, 28h
Front HubRoval Traverse SL, sealed cartridge bearings, 15mm thru-axle, 110mm spacing
Rear HubRoval Traverse SL, DT Swiss Star Ratchet, 54t engagement, SRAM XD driver body, 12mm thru-axle, 148mm spacing
SpokesDT Competition Race
Front TireButcher, GRID TRAIL casing, GRIPTON® T9 compound, 2Bliss Ready, 29x2.3""
Rear TireEliminator, GRID TRAIL casing, GRIPTON® T7 compound, 29x2.3""
Inner TubesStandard, Presta valve
SaddleBridge, 155/143mm, Hollow Ti-rails
SeatPostRockShox Reverb AXS, 30.9, 1X remote, (S1:100mm, S2: 125mm, S3: 150mm, S4-S6: 170mm)
Seat BinderAlloy, 38.6mm

Please note: Manufacturers can sometimes change the specification of the products from time to time.

Lifetime warranty* to the original owner against structural defects in material or workmanship on ALL models of Specialized-branded frames and forks

  • Includes seatstays and chainstays on full-suspension bikes
  • Does not include suspension forks and suspension parts
  • Does not include paint and graphics (these are covered below)

* Register your bike, frameset, or Roval wheels within the first 90 days of purchase for a lifetime warranty to the original owner.

Read the full warranty here

When you purchase a bike from Specialized Concept Stores, you'll receive a complimentary tune-up service at your nearest store within 6 weeks of bike delivery.

This free service is designed to ensure that the bike you've chosen is operating optimally and to make any necessary adjustments, such as cable stretching, common with new bikes.

However, if you encounter any issues with your bike at any point, we strongly advise you to cease riding and promptly book your bike in for its complimentary service to ensure your safety and riding pleasure.

When you receive your bike, you'll be pleasantly surprised at how effortless it is to get it road-ready. We've designed the assembly process to be as straightforward as possible, so you can start enjoying your new ride without delays.

All you need to do is install the handlebars, pedals, and wheels. It's a quick and hassle-free process that requires no advanced technical skills. Our user-friendly instructions and included tools will guide you through each step, ensuring a smooth and secure assembly.

Whether you're an experienced cyclist or new to bike assembly, you can trust that the process will be a breeze. Within no time, your bike will be fully assembled, and you'll be ready to hit the road, trail, or bike path with confidence.

We offer 10 days free cover with all new bikes purchased, provided by our insurance partner VeloLife. You will be covered for the first 10 days of ownership against theft and accidental damage, so you can purchase with confidence.

Give yourself the comfort of no obligation free insurance, make sure you have peace of mind from the moment you leave the store. If anything happens to the bike in the first 10 days of ownership, know you are covered!

Cycle to Work Scheme: Affordable Riding for UK Employees

Unlock a cost-effective way to own the bike of your dreams through the Cycle to Work Scheme. This initiative, available to employees in the UK, lets you enjoy the benefits of cycling while saving on your bike purchase.

With the Cycle to Work Scheme, you can use your pre-tax salary to acquire a brand-new bicycle and essential cycling accessories. This means significant savings for you, as your salary sacrifice reduces both your income tax and National Insurance contributions.

The process is seamless: Choose the bike that suits your needs and budget from our extensive range. Your employer will then set up a salary sacrifice arrangement, spreading the cost of your bike over a specified period, typically 12 to 18 months.

Once the salary sacrifice period ends, you have the option to own the bike outright for a nominal fee, ensuring you get to keep and enjoy your trusted two-wheeled companion for years to come.

Experience the freedom of cycling, save money, and reduce your carbon footprint with the Cycle to Work Scheme. Join countless UK employees who have already embraced this eco-friendly and wallet-friendly way of commuting.